نمایش ها:123 نویسنده:ویرایشگر سایت زمان انتشار: 2022-09-02 اصل و نسب:سایت
For harder materials, add impurities or granular abrasives to the water stream to cut them. This is called an abrasive waterjet cutting process. This material helps corrode materials that are difficult to cut with a simple flow of water.
How to use the water jet stone engraving machine?
What are the relevant parameters of the water jet stone engraving machine?
What is the main purpose of the water jet stone engraving machine?
The waterjet cutting process of water jet stone engraving machines is widely used in industry due to its ability to cope with changes. The accuracy of this method can be improved by increasing the pressure of the airflow. This can also be achieved by adding a nozzle to the output. This helps to improve the results of the machine.
The water jet stone engraving machine is an advanced method of cutting materials at the microscopic level. This method uses a smaller nozzle diameter, resulting in more precise and smaller cuts.
Another technique used to cut more complex parts is 3D waterjet cutting. In this method, the head is moved to exert a pressure flow on the material. Cutting can be done in 3D space, which helps to produce 3D parts instead of flat material cuts.
This water jet stone engraving machine makes it easier for operators to achieve the final result and increases productivity. As we all know, these methods take time to complete, and the CNC method offers the owner a lot of comfort.
The water jet stone engraving machine produced an accuracy of almost 0.003 inches. Higher accuracy can be achieved through advanced software during machine operation. A better operating system can lead to better results.
The water jet stone engraving machine is capable of cutting thick sections below 3 inches. Thicker parts can be cut with lower precision or speed.
It is generally known that the average cutting speed of a nominal water jet stone engraving machine is about 760 m/s. The high-pressure water flow makes the cutting process very fast and less time-consuming.
The water jet stone engraving machine has three main purposes: one is cutting non-flammable materials such as marble, ceramic tiles, glass, cement products, etc., and it is a thermal cutting material; the other is cutting flammable materials such as sheet steel, plastic, fabric, polyurethane, wood, leather, rubber, etc. Previously, it was also possible to cut thermally, but it is easy to burn and burrs and will not produce water cutting processing, and the physical and mechanical properties of the cutting material do not change, which is also the main advantage of water cutting; Third, cutting ammunition, flammable, flammable and explosive materials such as explosive environments cannot be replaced by other processing methods.
After reading, do you have a deeper understanding of the water jet stone engraving machine? For more information, please contact Dialead Stone Machinery. They will be happy to help you.